- LED 600nm -

5050FOC-60L / 14

Kif nistgħu naraw fl-istampa kif ġej, hemm tliet pożizzjonijiet ġewwa 5050 SMD LED u hemm ukoll 6 pinnijiet għall-konnessjoni kurrenti. Hemm tliet pinnijiet f'kull naħa, u waħda għall-katodu u oħra għall-anodu. Sabiex iżżid il-luminożità jew ir-radjazzjoni fuq LED wieħed, huwa l-aħjar mod biex tpoġġi tliet ċipep ġewwa l-LED sabiex dan l-LED jitjieb 3 darbiet. LED ta '600nm jarmi LED oranġjo, tista' wkoll issemmih bħala LED ambra. LED ta '600nm SMD jintużaw ħafna f'tipi ta' proġett ta 'dawl LED, proġett ta' dekorazzjoni LED jew xi eċċ. Għandek bżonn xi LED ta '600nm b'luminożità għolja għall-proġett tiegħek? Ikkuntattjana għal aktar dettall dwarha. Dan ma jħallikx diżappunt.

- Parametri tad-Dimensjoni-

Dawn il-kaxxa SMD LED huma wkoll disponibbli għal IR LED, UV LED, LED SMD Blu, LED SMD Aħmar, LED Ambra eċċ.

- Kulur li Jarmi -

Klassifikazzjonijiet Massimi Assoluti F'Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	180mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	60mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Karatteristiċi ottiċi u elettriċi ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.8	2.05	2.4	V	IF=60mA
		2.0	2.3	2.6	V	IF=180mA
		2.3	2.4	2.8	V	IF=300mA
Luminous Intensity	ΦVI	7		14	lm	IF=60mA
		20		30	lm	IF=180mA
		24		30	lm	IF=300mA
Lumiuous Power	PO	20		30	mw	IF=60mA
		55		75	mw	IF=180mA
		80		110	mw	IF=300mA
Peak Wavelength	λP	605	608	612	nm	IF=60mA
Dominant Wavelenth	λd	600	605	610	nm	IF=60mA
Half Width	Dl		15		nm	IF=60mA
Viewing Half Angle	2q1/2		±60		deg	IF=60mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- 5050SMD 605nm LED XY -

- Konnessjoni Golden Wire -

- Ippakkjar -

* Aħna nippakkjawha b'ippakkjar bil-vakwu wara tejpha bħala rukkell

- Applikazzjoni -

- LED Isfar Relatat -

- Produzzjoni -

- Użu LED SMD -